Inflatable Bounce Using Common FAQ
Inflatable Bounce Using Common FAQ 1, paste requirements In the first toy to glue evenly paste and the cloth, and then drying to half a minute, put the cloth attached to paste, planish after does not become warped edge, paste is completed. 2, the toy was scratched (a) the cut longer than 5cm should be in the sewing sewing, and then paste the cloth or fabric (two) the cut is less than 5cm to paste it directly 3, the joint line First with the needle opening seam smoothness, (or from the air cushion bottom apart into and sewing), available paste the opening place processing firm, also taking into account aesthetic 4, to beautify the place become warped edge With a small brush to apply a proper amount of water to become warped edge, pause after pressing tightly, firmly adhered to Toy after being used for a long time, because some parts of pinhole seam is pulled big, leakage quantity, consider using a cloth paste in the seam, gas leakage, such as the toy is too old, should consider the scrap, to prevent business problems. 5, air cushion local abnormal bulge Generally refers to pull the towel from the air cushion tear along the seam, can the air cushion bottom apart, with the needle bar and air connections, and then use the cloth paste, protective seam can be. Generally refers to pull the towel from the air cushion tear along the seam, can the air cushion bottom apart, with the needle bar and air connections, and then use the cloth paste, protective seam can be. 6, maintenance of common sense (a), the toy before releasing air, with half dry towel toy surface clean, dry air, cool and clean keeping folding device; (a), the toy before releasing air, with half dry towel toy surface clean, dry air, cool and clean keeping folding device; (two), if the toy safekeeping in water, can not completely discharge conditions, blowing on a dry and ventilated place, air to water dry, avoid water storage; (three), a blower should be stored in dry and ventilated place, avoiding damp; (three), a blower should be stored in dry and ventilated place, avoiding damp; (four), toys and stored for a long time, should be checked regularly have no moisture, should be in the air blow and wipe clean.